Micro 100 CCR

The MCCR 100 is specifically designed for the efficient and effective supply of power to airfield ground lighting series circuits.

 

Compliance with Standards

FAA AC 150/5345-10F

 

Features

•  Pre-programmed with default operating parameters suitable for most applications. Where necessary, changes can be made via the front panel keypad. An external PC is not necessary.
•  Accurate control of RMS output current into all loads from short circuit to full rated output
•  Multi-tapped output isolation transformer – tappings can be selected to match the load minimising the harmonic and increasing the efficiency
•  Output circuit isolated from the mains supply
•  Minimal cubicle footprint to reduce space requirements
•  Air cooled – no fans required
•  Low life cycle costs
•  Compatible with circuit selector and lamp switching equipment

•   Micro processor-controlled display allowing extensive CCR monitoring and diagnostic information to be presented to Engineers and Technicians.          This can include:
-  Output Current Value
-  Brightness Step
-  % of Maximum Output
-  Alarm Text Description
-  Number of Failed Lamps
-  Hours Run Counter
-  Insulation reading
-  Power analysis.

Technical Specifications

Power Factor

At nominal resistive load, nominal output current and nominal input voltage:-
•  Up to 0.9 for ratings up to 10 kVA
•  Up to 0.95 for 12 kVA and greater

 

Efficiency

At nominal power into resistive load, maximum brilliancy and nominal input voltage:-
•  90% or better

Output Power Ratings

•  At 380, 400, 415V:
Outputs of 2.5, 4.0, 5.0, 7.5, 10, 15, 20, 25, 30 kVA
•  At 210, 220, 240V:
Outputs of 2.5, 4.0, 5.0, 7.5, 10, 12.5, 15 kVA

Output Current Ratings

•  6.0, 6.6, 12, 20A

Input Voltage Ratings

•  220, 230, 240 Volts Single Phase 50/60 Hz
380, 400, 415, 440 Volts 2 Phase, 50/60 Hz